PDA

View Full Version : welder

j.lucas
April 6th, 2007, 06:13 PM
Lincoln 110 welder $200.00
chimchim
April 6th, 2007, 08:03 PM
mig, tig stick???? give a bro some info cuzLincoln 110 welder $200.00
j.lucas
April 7th, 2007, 07:06 AM
sending you a pm chim
Speedjunkies750
April 7th, 2007, 08:00 AM
If Chim doesn't take it, can you post more details about it for all of us?

Thanks
j.lucas
April 7th, 2007, 09:18 AM
Lincoln Pro Core 100 wire welder 115 Volt

30-100 amps output for welding on light to medium thickness materials.
• Welds up to 1/4 in. steel.
• Complete, ready to weld package for use with self-shielded flux-cored wire. Upgrades to MIG.
• Plugs into 115V, 20 amp outlet.
• Gun trigger safety feature keeps welding wire electrically "cold" until trigger is pressed.
• Compact, portable, lightweight and easy-to-use.
• For welding .035" flux-cored wire and .023-.030" solid MIG wire (solid MIG wire requires installation of K610-1 MIG Conversion Kit and supply of shielding gas).
• It's quick and easy to upgrade the Pro-Core 100 for MIG (gas-shielded solid wire) welding. To MIG weld mild steel or stainless steel, install K610-1 MIG Conversion Kit (stainless steel wire sold separately). To weld aluminum, install K610-1 and K664-2 Aluminum Welding Kit. Shielding gas sold separately.
• Welding procedure chart for mild steel is conveniently located inside wire feed section door making voltage and wire speed selection a snap!
• Fan-cooled for long life expectancy.
Baja340SF
April 7th, 2007, 10:42 AM
Ive got this same welder. Pretty handy item. Its not supposed to weld anything really thick but I was able to weld some 1/2" flat stock to another piece of flatstock, the only way this worked was to preheat the metal with a torch. (my backdrag attachement on my snow plow was worn down so i used my old cutting edge to add on to it). Its been working fine for the past two seasons with no failures. Also, years ago, welded a plow frame to the frame of my truck during a snowstorm.....same deal...preheat with torch.
Normally I have used it within its limitations and it has worked great. I dont have the mig attachment i just use the flux core wire. I have thought of adding the mig.......just never have.